★ The automatic loading robotic arm of this equipment can be customized according to the specific needs of the customers.
★ This equipment can meet the automation production requirements of one mold with one cavity or one mold with multiple cavities.
★ The automatic loading robotic arm is equipped with a vision system for real-time automatic inspection of the upper and lower mold surfaces (appearance) and lens surfaces (appearance).
NO | Project distinction | Content | Detailed specifications |
1 | Basic parameters | power source | Power supply: single-phase 220V; rated power: 2KW; |
Compressed air: 0.55MPa±5%, 55 liters/min; | |||
Mold specification | Diameter φ 16 ~ φ 90mm ; Square: 85mm×85mm The allowable height range of the total height of the upper and lower mold cores (including the preform): 22mm~68mm Scope of application: one cavity for one mold, multiple cavities for one mold | ||
Dimensions | 2100(L)×1300(W)×2150(H) ; Approx. weight: 1350kg | ||
3 | drive mode | High precision | High-precision electric cylinder and SMC cylinder |
4 | Processing cycle | around 60s | Depending on the processing model |
5 | Tray capacity | Finished tray size | One layer; it depends on the processing model |
Dimensions of the preform tray | One round layer; it depends on the processing model | ||
Specification and size of defective product tray | It depends on the processing machine | ||
6 | Air purification | FFU fan unit | Realize the air repurification of the small environment of the equipment |
7 | visual system | vision | Monitor the cosmetic condition of molds and lenses |
8 | Mold, lens and preform | transfer | Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors |
9 | Environmental requirements | humidity | 30-60% , but no condensation |
temperature | Normal temperature 20-28°C, but no condensation |