★ This equipment is suitable for seamless integration with non-spherical molding press machines from brands such as JinDing Optics (our company), DTK, SYS, etc. The automatic loading robotic arm can be customized according to the specific needs of customers.
★ This equipment can meet the automation production requirements of one mold with one cavity, one mold with two cavities, one mold with three cavities, one mold with four cavities, and one mold with six cavities.
★ The automatic loading robotic arm is equipped with a vision system for real-time automatic detection of the upper and lower mold surfaces (appearance) and the lens surface (appearance).
NO | Project distinction | Content | Detailed specifications |
1 | Basic parameters | power source | Power supply: single-phase 220V; rated power: 2KW |
Compressed air: 0.55MPa±5%; 50L/min | |||
Mold specification | Diameter: φ15~φ65mm; Height: 20 ~60mm; Square mold: 50×50mm Scope of application: one mold and one hole (claw type, optional top pen device) Two holes in one mold, three holes in one mold, four holes in one mold, six holes in one mold (vacuum adsorption type) Note: It is a multi-hole suction method | ||
Dimensions | 1600(L)×1300(W)×2100(H) ; Approx. weight: 820kg | ||
3 | drive mode | High precision electric cylinder cylinder | High-precision electric cylinder and SMC cylinder |
4 | Processing cycle | around 60s | Depending on the processing model |
5 | Tray capacity | finished tray | One layer, can hold 15 small rings 140×90 |
preform tray | One round layer, diameter 475mm can hold four 150×130 | ||
Defective product tray | 140mm×90mm | ||
6 | Air purification | FFU fan unit | Realize the air repurification of the small environment of the equipment |
7 | visual system | vision | Monitor the cosmetic condition of molds and lenses |
8 | Mold, lens and preform transfer | transfer | Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors |
9 | Environmental | humidity | 30-60% , but no condensation |
temperature | Normal temperature 20-28°C, but no condensation |